6 Best Dashboard Phone Mounts for Trucks (October 2026) Honest Reviews

The best overall pick for most truck drivers here is the Truckules 16.9-inch long-arm mount with a dash pad, because a long three-joint arm and a pad under the suction base solve the two big truck problems: a dashboard that sits far from the driver and a surface that is rarely flat. If you want a simpler, shorter mount or a screw-down option, the FPN vibration-damped mount is the better fit. Dashboard phone mounts for trucks are built to hold a phone steady on tall, deep dashes and windshields, through the constant vibration of a heavy vehicle.

Quick List

• Truckules Long-Arm Mount with Dash Pad (Big Rig, Black) – best for semis with deep, curved or textured dashboards
• VANMASS Suction and Clip Mount – best for pickups and vans that need dash, windshield and vent options in one kit
• Truckules Long-Arm Mount (18 Wheeler, Gray) – best for drivers with a flat, smooth dash who do not need the pad
• Truckules Long-Arm Mount with Dash Pad (Commercial, Black) – best for fleet drivers who want the same pad-equipped setup in a commercial-branded version
• FPN Heavy Duty Vibration-Damped Mount – best for a permanent, screw-mounted install in a truck or boat
• MAGIC JOHN Metal Windshield Mount – best for lighter-duty windshield use in pickups, SUVs and cars

Which One Is Right for You?

The choice comes down to how your cab is built and how permanent you want the setup. Suction bases are quick to move between vehicles but depend on a clean, non-porous surface. A screw-mounted base is more secure but needs a drilled hole. Whichever you choose, place it where it does not block your view of the road or your mirrors, and where you can reach it while belted.

All 6 Picks in Detail

1. Truckules Long-Arm Mount with Dash Pad (Big Rig, Black) – Best for Deep Semi Dashboards

As an Amazon Associate we earn from qualifying purchases at no extra cost to you.

#1 Pick

Truckules Truck Phone Mount + Dash Pad, 16.9" Long Holder, Big Rig, Black | 3-Joint Adjustable Arm, Dashboard & Windshield Mount, Road-Teste

Check Price on Amazon →

This mount pairs a 16.9-inch arm with a dash pad and is marketed for big rigs. The long, three-joint arm is the main attraction: it lets you bring the phone out from a distant dashboard toward the driver without leaning forward. The listing says it can be mounted on the dashboard or windshield, and the dash pad gives the suction base a more stable surface on textured or slightly curved panels.

For long-haul drivers, the practical benefit is consistency: once the three joints are set to a comfortable position, you can lock them and leave the arm alone, then fold or detach the phone when you park. Keep the cable routed along the dash edge so it does not tug the phone or catch the shifter or your arm.

The three joints let you set the height, angle and distance separately, so the phone ends up at a comfortable height for glancing at navigation, not for handling. Tighten each joint firmly; a long arm amplifies vibration if any joint is loose.

• 16.9-inch long arm with three adjustable joints
• Dash pad included per the listing name
• Dashboard and windshield mounting
• Black finish, marketed for big rigs
• Maximum phone width and base type: confirm on the product page

Pros:

• Long reach suits deep dashboards
• Pad gives the base a better surface

Cons:

• A long arm can sway if joints are not tight
• Takes up space on small dashes

Compared with the gray Truckules without a pad, this is the version to choose if your dash is not smooth and flat.

2. VANMASS Suction and Clip Mount – Best for Pickups and Vans with Mixed Mounting Needs

#2 Pick

[True Military-Grade] Car Phone Holder VANMASS [Upgraded Strongest Suction&Clip] Cell Phone Mount for Dashboard Windshield Vent Kit, Truck C

Check Price on Amazon →

The VANMASS listing describes a strong suction and clip system, with mounting options for the dashboard, windshield and air vent, and mentions use in trucks. It is a better match for a pickup, van or light-duty truck than for a tall semi cab, where an air vent clip may sit too low or too far away. The flexibility is the point: you can try the dash, the windshield or the vent and keep whichever position suits your seating.

A multi-position kit also helps when you share a vehicle with a co-driver who sits differently, or when you move between a pickup and a delivery van. Test fit before you commit to a position by holding the phone where you want it and checking that it does not hide a mirror, gauge or warning light.

• Suction mounting for dash and windshield
• Clip option for air vents
• Marketed as military-grade in the listing title
• Arm length and clamp opening width: confirm on the product page
• Full truck-use description: confirm on the product page

Pros:

• Several mounting positions in one kit
• Practical for lighter trucks and vans

Cons:

• Vent clips may not suit all heavy-truck vents
• Arm reach is not stated in the listing name

Next to the Truckules mounts, it offers more mounting variety but less reach.

3. Truckules Long-Arm Mount (18 Wheeler, Gray) – Best for Flat Dashes Without the Pad

#3 Pick

Truckules Truck Phone Mount, 16.9" Long Holder, 18 Wheeler, Gray | 3-Joint Adjustable Arm, Dashboard & Windshield Mount, Road-Tested Steady

Check Price on Amazon →

This gray version of the Truckules mount uses the same 16.9-inch, three-joint arm design and dashboard-or-windshield mounting, but the listing name does not mention a dash pad. It is the straightforward choice for a driver whose dashboard is smooth and flat enough for a suction base to seal, or who plans to use the windshield. Skipping the pad keeps the footprint on the dash smaller.

Because the listing does not name a pad, treat the suction base as a smooth-surface design. Clean the dash, press the base down, and check it again after the first hot day. If the seal weakens, move the base to the windshield or look at the pad-equipped version instead of forcing a poor fit.

• 16.9-inch arm with three adjustable joints
• Dashboard and windshield mounting
• Gray finish, marketed for 18-wheelers
• Dash pad: not named in the listing, so confirm on the product page
• Clamp width and base construction: confirm on the product page

Pros:

• Same long-reach arm as the pad version
• Neutral gray finish blends with many dashboards

Cons:

• No pad for rough or curved dashboards
• Suction depends on a clean, smooth surface

It is the near twin of the black Big Rig pad version, so decide between them by checking your dash surface.

4. Truckules Long-Arm Mount with Dash Pad (Commercial, Black) – Best for Fleet Setups

#4 Pick

Truckules Truck Phone Mount + Dash Pad, 16.9" Holder, Commercial, Black | 3-Joint Adjustable Arm, Dashboard & Windshield Mount, Road-Tested

Check Price on Amazon →

This listing is another Truckules mount with a dash pad and a 16.9-inch arm, labeled for commercial use. Its hardware appears to match the Big Rig version described above, differing mainly in the name, so confirm any differences on the product page. It is useful for owner-operators and fleet managers who want identical mounts across several trucks, so drivers get a consistent setup when they switch vehicles.

Fleet managers should also standardize on a mounting position and a cable route, so every driver reaches the phone the same way. A written rule such as “mount on the right of the steering column, below the sight line” prevents a patchwork of placements and keeps the cab consistent across the fleet.

• 16.9-inch long arm, three joints
• Dash pad included per the listing name
• Dashboard and windshield mounting
• Black finish, labeled for commercial trucks
• Differences from the Big Rig listing: confirm on the product page

Pros:

• Good for standardizing across vehicles
• Pad and long arm in one package

Cons:

• Near-duplicate of another Truckules listing in this guide
• Still requires correct placement to stay legal and safe

Compared with the gray non-pad model, it is the better choice for rough dashboards and for fleets that want the same pad in every cab.

5. FPN Heavy Duty Vibration-Damped Mount – Best for Permanent Screw-Down Installs

#5 Pick

FPN Heavy Duty Phone Mount Holder with Vibration Dampener for Boat Truck Car [Camera Friendly] [1s Lock & Release] [Aluminum Screw-Mounted A

Check Price on Amazon →

The FPN mount is described as heavy duty, with a vibration dampener, a camera-friendly clamp, a one-second lock and release and an aluminum, screw-mounted arm. That screw-mounted design marks it as a different kind of mount from the suction models: it bolts into a surface rather than relying on vacuum. It is aimed at trucks, boats and cars, which makes it a good fit for work trucks and vehicles where the phone stays put for years.

If you choose a screw-down mount, plan the install: check what sits behind the panel, use the supplied hardware or a suitable alternative, and avoid airbag covers entirely. If you are unsure, a professional installer or a fleet shop can fit it in a few minutes and make sure the cable route is tidy.

A fixed installation can be more secure than a suction base, but it needs thought. Choose a spot where drilling will not hit wiring or airbags, and make sure the phone does not sit in the sweep of the windshield or block gauges.

• Aluminum, screw-mounted arm per the listing
• Vibration dampener built in
• One-second lock and release clamp
• Camera-friendly design so rear lenses stay clear
• Arm length, exact base style and phone width limits: confirm on the product page

Pros:

• Does not rely on suction
• Dampening helps with vibration

Cons:

• Needs drilling or a fixed mounting point
• Harder to move between vehicles

Compared with the Truckules mounts, it is the permanent option rather than the removable one.

6. MAGIC JOHN Metal Windshield Mount – Best for Lighter-Duty Windshield Use

#6 Pick

MAGIC JOHN Car Phone Holder, Ultra-Durable Mteal Phone Holders for Your Car, 360° Rotation Cell Phone Car Mount for Windshield, Suction Cup

Check Price on Amazon →

MAGIC JOHN markets this as an ultra-durable metal car phone holder with 360-degree rotation and a suction cup for the windshield. It is a general car and truck mount rather than a dedicated big-rig product, so it makes the most sense in a pickup, SUV or car, or in a truck where the phone can sit close to the driver. The metal build suggests sturdiness, but the exact arm length and clamp range are not stated in the listing name.

If you tow, haul or drive a work truck with a high dash, check the reach before buying; a mount designed for passenger-car windshields may leave the phone too far or too close. For a light-duty truck where the phone sits near the driver, a simple metal mount like this can be perfectly adequate.

• Metal construction per the listing
• 360-degree rotation
• Suction cup for the windshield
• Dashboard use and arm length: confirm on the product page
• Phone width capacity and case compatibility: confirm on the product page

Pros:

• All-metal look and feel
• Simple windshield setup

Cons:

• Not specifically designed for big-rig dashes
• Reach is not stated in the listing name

Against the VANMASS kit, it is simpler but offers fewer mounting positions.

Specs Compared

How We Chose These

This guide comes from research, not from installing the mounts in a truck. We read listing titles and product descriptions for mounting method, arm length, adjustability and vibration handling, and compared them with general guidance on securing phones in commercial vehicles. We prioritized mounts that name truck or heavy-duty use, that offer more than one mounting position or a long reach, and that include features such as a dash pad or vibration damping. Where a listing does not state a spec, we mark it to confirm. Because three listings come from the same brand and share a design, we point out where they differ and where they are near twins. Always check your state and federal rules on where devices may be mounted before installing.

What to Look For

Mounting method: suction, clip or screw

Suction bases (including gel and vacuum designs) are removable and fast to reposition, but they need a clean, smooth, non-porous surface and can lose grip in extreme heat or cold. A dash pad adds a flat, grippy surface under the base for textured dashboards. Vent clips are quick but only work where the vent is sturdy and close to eye level. Screw-down mounts offer the most secure hold and ignore surface texture, but they require drilling and are less portable.

Arm length and joints

Truck dashboards are deep, and the driver sits farther back than in a car. A 16.9-inch arm with three joints, like the Truckules design, lets you place the phone where you can glance at it without leaning. The tradeoff is leverage: the longer the arm, the more any vibration is magnified at the phone. Look for locking joints, short extension when possible and a snug clamp.

Vibration and clamp security

Diesel engines, rough roads and rumble strips put steady vibration into a mount. A vibration dampener, as on the FPN, softens it. The clamp should grip the phone’s sides firmly, and it should handle your case; large phones in thick cases may exceed the clamp opening, so confirm the maximum width. If you use your phone for navigation, keep it in portrait or landscape orientation and avoid blocking its charging port.

Placement, visibility and the rules

Place the phone where it does not block your view of the road, mirrors or gauges, and where you can reach it while belted. For commercial drivers, federal rules restrict handheld phone use while driving, and states have their own rules on windshield-mounted items. Check the requirements that apply to you before installing, and set the destination before you move the truck. A good rule of thumb is that a mount should let you start or end a call or navigation with a single touch, with your eyes mostly on the road.

Worked example: for a semi with a deep dash, set the base on the pad near the center, extend the first joint toward you, raise the second joint to bring the phone to just below your sight line over the dash, and tilt the third joint so the screen faces you. Tighten all three joints and give the arm a firm push; if it sways noticeably, shorten it.

Heat, cold and surface prep

Parked trucks can get very hot in sun and very cold in winter. Wipe the surface with isopropyl alcohol before applying a suction base, let it dry, and press firmly. Remove the phone when parked in extreme heat and avoid leaving a suction mount stressed for days, because the seal can slowly fail.

Cable routing and power

A phone running navigation drains its battery quickly, so most truck drivers keep it plugged in. Route the charging cable so it hangs in a loose loop with no tension at the phone, and secure the extra length with a clip or a cable tie so it cannot snag the steering wheel, shifter or your arm. Use a cable of the right length: a coiled or short cable keeps clutter down. If your phone runs warm in direct sun, point a vent toward it or park with a sunshade to avoid the phone slowing down or shutting off.

Also consider where the phone goes when you leave the cab. A mount that releases the phone with one hand, or an arm that folds low, makes it easy to take the phone with you and keeps it out of sight. Do not leave valuables on display in an unattended truck.

Maintenance between trips

Treat the mount as part of your safety gear. Before each trip, grab the arm and give it a firm tug to confirm the base is sealed and the joints are tight. Wipe the base and the dashboard with a clean cloth if dust has built up, and replace any clamp pad that has lost its grip. In winter, warm the cab before attaching a suction base to cold glass, and in summer take the phone with you when you park in direct sun. If a base loses suction repeatedly, move it, clean it again or consider a screw-down alternative.

Phone size, cases and rugged accessories

Many truck drivers use large phones in rugged or battery cases, which increases both width and weight. Measure the phone with its case, compare the number with the clamp opening on the product page, and look for padded jaws that will not scratch the case. If your phone has side buttons you use often, make sure the clamp does not press them. A heavier phone also puts more strain on a long arm, so shorten the extension where you can.

Questions

Will a suction phone mount stay on a truck dashboard?

It can, if the surface is clean and smooth and the base is pressed on firmly. Textured dashboards usually need a dash pad or a screw-down mount instead.

Is it legal to mount a phone on the windshield of a truck?

Rules vary by state and by vehicle type, and commercial drivers also face federal rules on phone use. Check the requirements that apply to you before mounting anything on the glass.

How long should the arm be on a truck mount?

Deep truck dashboards often call for a long arm such as 16.9 inches, but use the shortest length that puts the phone within easy reach. A shorter arm vibrates less.

Can these mounts hold a large phone in a thick case?

Many can, but each clamp has a maximum width. Measure your phone with its case and compare it with the opening listed on the product page.

Do I need a dash pad?

Choose a pad if your dashboard is textured, curved or slightly dusty. On a flat, smooth, clean dash, a bare suction base may be enough.

Which mount is best for navigation while driving?

The best mount keeps the screen at a comfortable glance height without blocking the view. Start navigation before you roll, and use voice commands to avoid touching the phone while moving.

Update History

• October 20, 2026 – Initial publication; product set drawn from current catalog listings.
• Check the product page for current specifications and availability before buying.

Sources

• Retailer listing titles, descriptions and specification fields for each product named above
• Seller product pages describing the Truckules arm length, joints and mounting options